Archiv verlassen und diese Seite im Standarddesign anzeigen : Integralzeichen funktioniert nicht
Hab ein Problem und zwar, dass eine Formel in der ein Integralzeichen drin ist nicht funktioniert, kann das daran liegen, dass ich irgendwelche veralteten LaTeX Versionen benutze?
PS: Ich hab zu 99 % keinen Fehler gemacht, weil ich so ein Musterbeispiel mit einer Integralformel aus einem LaTeX Tutorial genommen, kopiert und eingefügt habe, aber es funktioniert trotzdem nicht!!!
Was kann ich machen?
Stefan_K
25-04-2008, 21:32
Hallo Isaac,
kannst Du uns das Beispiel zeigen, worin das Integralsymbol nicht funktioniert? Compilierbar, also mit Präambel. Das könnten wir dann mit unseren LaTeX-Versionen nachvollziehen.
Zusätzlich könntest Du die .log-Datei hier als Anhang posten, ggf. in .txt umbenannt oder gezippt. Darin würden wir evtl. Warnungen und Fehler lesen können.
Sonst verrate uns wenigstens die Fehlermeldung. ;) Funktioniert nicht reicht zumindest mir nicht.
Viele Grüße,
Stefan
Hier die Musterdatei:
\documentclass{scrartcl}
\usepackage[ansinew]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{graphicx,textcomp,booktabs}
\usepackage{mathptmx,courier}
\usepackage[scaled]{helvet}
\usepackage[ngerman]{babel}
\usepackage{amsmath}
\begin{document}
Wir machen eine kleine Integration und danach eine Differentiation:
$ \int{x}dx $
\end{document}
Es geht in der Align Umgebung auch nicht!
Es gibt eig. gar keine Fehlermeldung, aber wenn ich es als DVi mit diesem Yap öffne kommt das: Not all fonts could be loaded. See File->Document Properties, for details.
Und dann ist statt dem Integral zeichen ein hochgestelltes großes R udn dann x dx ganz normal!
Stefan_K
25-04-2008, 21:46
Hallo Isaac,
es scheint ja mit den Schriften Probleme zu geben. Versuch es zunächst mal ohne die beiden Zeilen
\usepackage{mathptmx,courier}
\usepackage[scaled]{helvet}
Stefan
Hier die Musterdatei:
Es gibt eig. gar keine Fehlermeldung, aber wenn ich es als DVi mit diesem Yap öffne kommt das: Not all fonts could be loaded. See File->Document Properties, for details.
Und dann ist statt dem Integral zeichen ein hochgestelltes großes R udn dann x dx ganz normal!
in der Logdatei steht genau, welcher Font nicht gefunden wurde. Entweder
hast du ihn nicht installiert oder deine Map-Datei ist faul
Welcehs System?
Herbert
Wenn ich die beiden Pakete weglasse ändert sich gar nichts; ist dieses mathpx nicht für den Matheteil verasntwortlich, das kann dann doch gar nicht gehen, wenn ich es weglasse oder?
Was genau ist den eig. die Log Datei?
Da gibts bei mir 6 versch. Dateien wenn ich ein Dokument erstelle, aber keine hat diue Endung log!
Es gibt eine AUX, BBL, TEX und TOC Datei und dann noch ein DVI File, Adobe Reader Document, Systemmonitordatei, Textdokument!
Welches is es denn?
Ich hab das ganze auf Windows Vista
Wenn ich die beiden Pakete weglasse ändert sich gar nichts; ist dieses mathpx nicht für den Matheteil verasntwortlich, das kann dann doch gar nicht gehen, wenn ich es weglasse oder?
Was genau ist den eig. die Log Datei?
Da gibts bei mir 6 versch. Dateien wenn ich ein Dokument erstelle, aber keine hat diue Endung log!
Es gibt eine AUX, BBL, TEX und TOC Datei und dann noch ein DVI File, Adobe Reader Document, Systemmonitordatei, Textdokument!
Welches is es denn?
Ich hab das ganze auf Windows Vista
es muss eine .log geben, es sei denn, dein Editor erlaubt, dass diese automatisch
gelöscht wird. Ansonsten kannst du auch die normale Ausgabe während des
LaTeX-Laufs hier angeben, da steht dann auch schon, was nicht gefunden wurde.
Ansonsten mach mal ein normales Update mit MiKTeX.
Herbert
Donalduck
26-04-2008, 11:01
vielleicht ist es die Systemmonitordatei oder das Textdokument?
Schau doch einfach mal rein ;-)
Sollte so in etwa anfangen:
"This is pdfTeX, Version 3.141592-1.40.7"
Du könntest in MiKTeX auch einschalten, dass fehlende Pakete automatisch installiert werden, falls du das noch nicht hast.
Die Textdatei is die Logdatei:
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 26 APR 2008 10:32
entering extended mode
**LaTeX1.tex
(LaTeX1.tex
LaTeX2e <2005/12/01>
Babel <v3.8h> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrartcl.cls"
Document Class: scrartcl 2007/10/12 v2.97d KOMA-Script document class (article)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2007/10/12 v2.97d KOMA-Script package (basics and keyval use)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2007/03/07 v2.97a KOMA-Script package (loading files)
Package scrlfile, 2007/03/07 v2.97a KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))
Class scrartcl Info: File `size11.clo' used to setup font sizes on input line 9
00.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\size11.clo"
File: size11.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\typearea.sty"
Package: typearea 2007/10/12 v2.97d KOMA-Script package (type area)
Package typearea, 2007/10/12 v2.97d KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-
\ta@bcor=\skip41
\ta@div=\count79
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV-departure = -6/100
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.60002pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 890.
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count86
\c@table=\count87
\bibindent=\dimen102
) ("C:\Program Files\MiKTeX 2.7\tex\latex\base\inputenc.sty"
Package: inputenc 2006/05/05 v1.1b Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ansinew.def"
File: ansinew.def 2006/05/05 v1.1b Input encoding file
))
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphics.sty"
Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: dvips.def on input line 90.
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\dvips.def"
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
))
\Gin@req@height=\dimen103
\Gin@req@width=\dimen104
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\textcomp.sty"
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
)
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.
Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\booktabs\booktabs.sty"
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen105
\lightrulewidth=\dimen106
\cmidrulewidth=\dimen107
\belowrulesep=\dimen108
\belowbottomsep=\dimen109
\aboverulesep=\dimen110
\abovetopsep=\dimen111
\cmidrulesep=\dimen112
\cmidrulekern=\dimen113
\defaultaddspace=\dimen114
\@cmidla=\count88
\@cmidlb=\count89
\@aboverulesep=\dimen115
\@belowrulesep=\dimen116
\@thisruleclass=\count90
\@lastruleclass=\count91
\@thisrulewidth=\dimen117
)
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\babel.sty"
Package: babel 2005/11/23 v3.8h The Babel package
*************************************
* Local config file bblopts.cfg used
*
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\bblopts.cfg"
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
)
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\ngermanb.ldf"
Language: ngermanb 2004/02/20 v2.6m new German support from the babel system
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\babel.def"
File: babel.def 2005/11/23 v3.8h Babel common definitions
\babel@savecnt=\count92
\U@D=\dimen118
)
\l@naustrian = a dialect from \language\l@ngerman
Package babel Info: Making " an active character on input line 92.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsmath.sty"
Package: amsmath 2000/07/18 v2.13 AMS math features
\@mathmargin=\skip47
For additional information on amsmath, use the `?' option.
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amstext.sty"
Package: amstext 2000/06/29 v2.01
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsgen.sty"
File: amsgen.sty 1999/11/30 v2.0
\@emptytoks=\toks17
\ex@=\dimen119
))
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsbsy.sty"
Package: amsbsy 1999/11/29 v1.2d
\pmbraise@=\dimen120
)
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsopn.sty"
Package: amsopn 1999/12/14 v2.01 operator names
)
\inf@bad=\count93
LaTeX Info: Redefining \frac on input line 211.
\uproot@=\count94
\leftroot@=\count95
LaTeX Info: Redefining \overline on input line 307.
\classnum@=\count96
\DOTSCASE@=\count97
LaTeX Info: Redefining \ldots on input line 379.
LaTeX Info: Redefining \dots on input line 382.
LaTeX Info: Redefining \cdots on input line 467.
\Mathstrutbox@=\box27
\strutbox@=\box28
\big@size=\dimen121
LaTeX Font Info: Redeclaring font encoding OML on input line 567.
LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
\macc@depth=\count98
\c@MaxMatrixCols=\count99
\dotsspace@=\muskip10
\c@parentequation=\count100
\dspbrk@lvl=\count101
\tag@help=\toks18
\row@=\count102
\column@=\count103
\maxfields@=\count104
\andhelp@=\toks19
\eqnshift@=\dimen122
\alignsep@=\dimen123
\tagshift@=\dimen124
\tagwidth@=\dimen125
\totwidth@=\dimen126
\lineht@=\dimen127
\@envbody=\toks20
\multlinegap=\skip48
\multlinetaggap=\skip49
\mathdisplay@stack=\toks21
LaTeX Info: Redefining \[ on input line 2666.
LaTeX Info: Redefining \] on input line 2667.
) (LaTeX1.aux)
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 8.
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 8.
LaTeX Font Info: Try loading font information for TS1+cmr on input line 8.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1cmr.fd"
File: ts1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 8.
LaTeX Font Info: Try loading font information for T1+cmss on input line 12.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1cmss.fd"
File: t1cmss.fd 1999/05/25 v2.5h Standard LaTeX font definitions
) (LaTeX1.toc
Class scrartcl Info: You've told me to use the font selection of the element
(scrartcl) `sectioning' that is an alias of element `disposition'
(scrartcl) on input line 2.
)
\tf@toc=\write3
LaTeX Font Info: Try loading font information for T1+cmtt on input line 38.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1cmtt.fd"
File: t1cmtt.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
! LaTeX Error: Cannot determine size of graphic in C:/Users/Christoph/Pictures/
Unbenannt.jpg (no BoundingBox).
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
l.46 ...C:/Users/Christoph/Pictures/Unbenannt.jpg}
Try typing <return> to proceed.
If that doesn't work, type X <return> to quit.
File: C:/Users/Christoph/Pictures/Unbenannt.jpg Graphic file (type eps)
<C:/Users/Christoph/Pictures/Unbenannt.jpg> [1
] [2] (LaTeX1.aux) )
Here is how much of TeX's memory you used:
2999 strings out of 95341
38408 string characters out of 1184199
99231 words of memory out of 1500000
6150 multiletter control sequences out of 110000
19510 words of font info for 50 fonts, out of 1200000 for 2000
14 hyphenation exceptions out of 8191
34i,8n,36p,673b,266s stack positions out of 5000i,500n,10000p,200000b,5000s
Output written on LaTeX1.dvi (2 pages, 3268 bytes).
Ich kann da nix erkennen^^
Donalduck
26-04-2008, 11:36
! LaTeX Error: Cannot determine size of graphic in C:/Users/Christoph/Pictures/
Unbenannt.jpg (no BoundingBox).
Da stimmt wohl mit deinem Bild was nicht ;-)
Ja, das schon, aber kann das mit dem Integralzeichen was zu tun haben?
Wohl eher nicht oder, weil ich hab ohne irgendwas anderes dassselbe Problem
! LaTeX Error: Cannot determine size of graphic in C:/Users/Christoph/Pictures/
Unbenannt.jpg (no BoundingBox).
Da stimmt wohl mit deinem Bild was nicht ;-)
das ist ok, aber er hat latex laufen lassen und nicht pdflatex.
Herbert
Die Textdatei is die Logdatei:
Ich kann da nix erkennen^^
du hast aber jetzt die Times nicht geladen. Deshalb gibt es auch keine
Fehlermeldungen.
Herbert
Ich versteh grad gar nix!
Was is Times oder pdflatex?
Was kann ich dagegen machen?
Kann mir hier keiner helfen?
Ich versteh grad gar nix!
Was is Times oder pdflatex?
Was kann ich dagegen machen?
na diese Zeilen drinlassen:
\usepackage{mathptmx,courier}
\usepackage[scaled]{helvet}
bzw. nicht auskommentieren, wobei courier geradezu grässlich ist.
\usepackage[scaled]{luximono}
wäre besser
Herbert
Also einfach so lassen?
Aber das kanns doch auch nicht sein, wenn es so nicht funktioniert und ich daran nix ändere???
Also einfach so lassen?
Aber das kanns doch auch nicht sein, wenn es so nicht funktioniert und ich daran nix ändere???
wie soll ich denn sonst herausfinden, warum es nicht geht.
Dazu brauche ich das komplette logfile mit diesen Paketen.
Herbert
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 29 APR 2008 15:18
entering extended mode
**LaTeX1.tex
(LaTeX1.tex
LaTeX2e <2005/12/01>
Babel <v3.8h> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrartcl.cls"
Document Class: scrartcl 2007/10/12 v2.97d KOMA-Script document class (article)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2007/10/12 v2.97d KOMA-Script package (basics and keyval use)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2007/03/07 v2.97a KOMA-Script package (loading files)
Package scrlfile, 2007/03/07 v2.97a KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))
Class scrartcl Info: File `size11.clo' used to setup font sizes on input line 9
00.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\size11.clo"
File: size11.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\typearea.sty"
Package: typearea 2007/10/12 v2.97d KOMA-Script package (type area)
Package typearea, 2007/10/12 v2.97d KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-
\ta@bcor=\skip41
\ta@div=\count79
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV-departure = -6/100
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.60002pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 890.
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count86
\c@table=\count87
\bibindent=\dimen102
) ("C:\Program Files\MiKTeX 2.7\tex\latex\base\inputenc.sty"
Package: inputenc 2006/05/05 v1.1b Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ansinew.def"
File: ansinew.def 2006/05/05 v1.1b Input encoding file
))
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphics.sty"
Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: dvips.def on input line 90.
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\dvips.def"
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
))
\Gin@req@height=\dimen103
\Gin@req@width=\dimen104
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\textcomp.sty"
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
)
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.
Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\booktabs\booktabs.sty"
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen105
\lightrulewidth=\dimen106
\cmidrulewidth=\dimen107
\belowrulesep=\dimen108
\belowbottomsep=\dimen109
\aboverulesep=\dimen110
\abovetopsep=\dimen111
\cmidrulesep=\dimen112
\cmidrulekern=\dimen113
\defaultaddspace=\dimen114
\@cmidla=\count88
\@cmidlb=\count89
\@aboverulesep=\dimen115
\@belowrulesep=\dimen116
\@thisruleclass=\count90
\@lastruleclass=\count91
\@thisrulewidth=\dimen117
)
! LaTeX Error: File `mathpx.sty' not found.
Type X to quit or <RETURN> to proceed,
or enter new name. (Default extension: sty)
Enter file name:
! Emergency stop.
<read *>
l.6 \usepackage
[scaled]{luximono}
*** (cannot \read from terminal in nonstop modes)
Here is how much of TeX's memory you used:
1881 strings out of 95341
24337 string characters out of 1184199
78861 words of memory out of 1500000
5106 multiletter control sequences out of 110000
4709 words of font info for 16 fonts, out of 1200000 for 2000
14 hyphenation exceptions out of 8191
34i,1n,36p,220b,47s stack positions out of 5000i,500n,10000p,200000b,5000s
No pages of output.
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 29 APR 2008 15:18
entering extended mode
! LaTeX Error: File `mathpx.sty' not found.
den Fehler hätteste doch nun selbst beseitigen können.
l.6 \usepackage
[scaled]{luximono}
kommentiere dieses aus, also %\usepackage...
da du luximono nicht installiert hast.
Ich konnte also nichts mit diesem Logfile anfangen.
Herbert
Ok, und woher bekomme ich diese Datei mathpx.sty????
Moin moin,
Ok, und woher bekomme ich diese Datei mathpx.sty????
Bei Deinem Problem werd ich Dir vermutlich nicht helfen können, aber mach Dir das Leben doch nicht unnötig schwer: in Post#3 hast Du doch bereits ein Beispiel gepostet, das bei Dir nicht funktioniert -- laß das einfach laufen und poste die so entstandene .log-Datei.
MfG
Hier die Logdatei von einem normalen Dokument mit einem Integral!
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 30 APR 2008 16:32
entering extended mode
**LaTeX1.tex
(LaTeX1.tex
LaTeX2e <2005/12/01>
Babel <v3.8h> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrartcl.cls"
Document Class: scrartcl 2007/10/12 v2.97d KOMA-Script document class (article)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2007/10/12 v2.97d KOMA-Script package (basics and keyval use)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2007/03/07 v2.97a KOMA-Script package (loading files)
Package scrlfile, 2007/03/07 v2.97a KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))
Class scrartcl Info: File `size11.clo' used to setup font sizes on input line 9
00.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\size11.clo"
File: size11.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\typearea.sty"
Package: typearea 2007/10/12 v2.97d KOMA-Script package (type area)
Package typearea, 2007/10/12 v2.97d KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-
\ta@bcor=\skip41
\ta@div=\count79
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV-departure = -6/100
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.60002pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 890.
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count86
\c@table=\count87
\bibindent=\dimen102
) ("C:\Program Files\MiKTeX 2.7\tex\latex\base\inputenc.sty"
Package: inputenc 2006/05/05 v1.1b Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ansinew.def"
File: ansinew.def 2006/05/05 v1.1b Input encoding file
))
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphics.sty"
Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: dvips.def on input line 90.
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\dvips.def"
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
))
\Gin@req@height=\dimen103
\Gin@req@width=\dimen104
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\textcomp.sty"
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
)
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.
Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\booktabs\booktabs.sty"
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen105
\lightrulewidth=\dimen106
\cmidrulewidth=\dimen107
\belowrulesep=\dimen108
\belowbottomsep=\dimen109
\aboverulesep=\dimen110
\abovetopsep=\dimen111
\cmidrulesep=\dimen112
\cmidrulekern=\dimen113
\defaultaddspace=\dimen114
\@cmidla=\count88
\@cmidlb=\count89
\@aboverulesep=\dimen115
\@belowrulesep=\dimen116
\@thisruleclass=\count90
\@lastruleclass=\count91
\@thisrulewidth=\dimen117
)
! LaTeX Error: File `mathpx.sty' not found.
Type X to quit or <RETURN> to proceed,
or enter new name. (Default extension: sty)
Enter file name:
! Emergency stop.
<read *>
l.6 \usepackage
[scaled]{luximono}
*** (cannot \read from terminal in nonstop modes)
Here is how much of TeX's memory you used:
1881 strings out of 95341
24337 string characters out of 1184199
78861 words of memory out of 1500000
5106 multiletter control sequences out of 110000
4709 words of font info for 16 fonts, out of 1200000 for 2000
14 hyphenation exceptions out of 8191
34i,1n,36p,220b,47s stack positions out of 5000i,500n,10000p,200000b,5000s
No pages of output.
Hier die Logdatei von einem normalen Dokument mit einem Integral!
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 30 APR 2008 16:32
entering extended mode
! LaTeX Error: File `mathpx.sty' not found.
Type X to quit or <RETURN> to proceed,
or enter new name. (Default extension: sty)
Das Paket heißt mathptmx, hast du doch selber mal angegeben ...
Enter file name:
! Emergency stop.
<read *>
l.6 \usepackage
[scaled]{luximono}
*** (cannot \read from terminal in nonstop modes)
und das solltest du auskommentieren, weil du luximono nicht installiert hast.
Herbert
OK, das Ausklammern hab ich vergessen, jetzt hab ich geschrieben:
\usepackage{mathptmx} jetzt sieht man schon die Grenzen des Integrals aber es ist statt dem Zeichen immer noch dieses R!
Ich dreh langsam durch, woran kann das nur liegen??
OK, das Ausklammern hab ich vergessen, jetzt hab ich geschrieben:
\usepackage{mathptmx} jetzt sieht man schon die Grenzen des Integrals aber es ist statt dem Zeichen immer noch dieses R!
Ich dreh langsam durch, woran kann das nur liegen??
Mein letzter Versuch: du solltst das Logfile angeben! Bislang hast du noch
keins angegeben, welches sich auf mathptmx bezieht.
Herbert
Mir hat man doch gesagt, dasss das Logfile dieses ist, wo mit This is anfängt!!
Welches brauche ich dann wirklich??
Mir hat man doch gesagt, dasss das Logfile dieses ist, wo mit This is anfängt!!
es ist ja auch irgendeine logdatei, nur passt sie nicht zu Deinem .tex-Beispiel.
Welches brauche ich dann wirklich??
Wenn Du Dein Beispiel aus Post#3 (http://www.mrunix.de/forums/showpost.php?p=262983&postcount=3) `foo.tex' genannt hast und LaTeX drauf losgelassen hast, dann hast Du in demselben Ordner, in dem auch Deine `foo.tex' liegt, eine `foo.log' -- selbst der Explorer kennt afaik eine Einstellung dafür, ``Dateiendungen für bekannte Dateien'' nicht auszublenden -- um diese `foo.log' geht es, nicht um `bar.log' und wie sie bei Dir alle heißen mögen.
Überzeuge Dich aber erst davon, ob in `foo.tex' noch das drinsteht, was Du hier (http://www.mrunix.de/forums/showpost.php?p=262983&postcount=3) gepostet hast.
MfG
Ok
Ich war jetzt länger nicht da; hier ist jetzt die Logdatei mit dem Namen der Datei von der Datei die ich am Anfang gepostet habe mit demselben Problem, dass statt dem Integralzeichen ein hochgestelltes R da steht:
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 17 JUN 2008 14:39
entering extended mode
**BSP.tex
(BSP.tex
LaTeX2e <2005/12/01>
Babel <v3.8h> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrartcl.cls"
Document Class: scrartcl 2007/10/12 v2.97d KOMA-Script document class (article)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2007/10/12 v2.97d KOMA-Script package (basics and keyval use)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2007/03/07 v2.97a KOMA-Script package (loading files)
Package scrlfile, 2007/03/07 v2.97a KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))
Class scrartcl Info: File `size11.clo' used to setup font sizes on input line 9
00.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\size11.clo"
File: size11.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\koma-script\typearea.sty"
Package: typearea 2007/10/12 v2.97d KOMA-Script package (type area)
Package typearea, 2007/10/12 v2.97d KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-
\ta@bcor=\skip41
\ta@div=\count79
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV-departure = -6/100
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.60002pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 890.
)
\c@part=\count80
\c@section=\count81
\c@subsection=\count82
\c@subsubsection=\count83
\c@paragraph=\count84
\c@subparagraph=\count85
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count86
\c@table=\count87
\bibindent=\dimen102
) ("C:\Program Files\MiKTeX 2.7\tex\latex\base\inputenc.sty"
Package: inputenc 2006/05/05 v1.1b Input encoding file
\inpenc@prehook=\toks15
\inpenc@posthook=\toks16
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ansinew.def"
File: ansinew.def 2006/05/05 v1.1b Input encoding file
))
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\graphics.sty"
Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: dvips.def on input line 90.
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\dvips.def"
File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
))
\Gin@req@height=\dimen103
\Gin@req@width=\dimen104
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\textcomp.sty"
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
)
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.
Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\booktabs\booktabs.sty"
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen105
\lightrulewidth=\dimen106
\cmidrulewidth=\dimen107
\belowrulesep=\dimen108
\belowbottomsep=\dimen109
\aboverulesep=\dimen110
\abovetopsep=\dimen111
\cmidrulesep=\dimen112
\cmidrulekern=\dimen113
\defaultaddspace=\dimen114
\@cmidla=\count88
\@cmidlb=\count89
\@aboverulesep=\dimen115
\@belowrulesep=\dimen116
\@thisruleclass=\count90
\@lastruleclass=\count91
\@thisrulewidth=\dimen117
)
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\mathptmx.sty"
Package: mathptmx 2005/04/12 PSNFSS-v9.2a Times w/ Math, improved (SPQR, WaS)
LaTeX Font Info: Redeclaring symbol font `operators' on input line 28.
LaTeX Font Info: Overwriting symbol font `operators' in version `normal'
(Font) OT1/cmr/m/n --> OT1/ztmcm/m/n on input line 28.
LaTeX Font Info: Overwriting symbol font `operators' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/ztmcm/m/n on input line 28.
LaTeX Font Info: Redeclaring symbol font `letters' on input line 29.
LaTeX Font Info: Overwriting symbol font `letters' in version `normal'
(Font) OML/cmm/m/it --> OML/ztmcm/m/it on input line 29.
LaTeX Font Info: Overwriting symbol font `letters' in version `bold'
(Font) OML/cmm/b/it --> OML/ztmcm/m/it on input line 29.
LaTeX Font Info: Redeclaring symbol font `symbols' on input line 30.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/cmsy/m/n --> OMS/ztmcm/m/n on input line 30.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/cmsy/b/n --> OMS/ztmcm/m/n on input line 30.
LaTeX Font Info: Redeclaring symbol font `largesymbols' on input line 31.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal'
(Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold'
(Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31.
\symbold=\mathgroup4
\symitalic=\mathgroup5
LaTeX Font Info: Redeclaring math alphabet \mathbf on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal'
(Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34.
LaTeX Font Info: Redeclaring math alphabet \mathit on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal'
(Font) OT1/cmr/m/it --> OT1/ptm/m/it on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold'
(Font) OT1/cmr/bx/it --> OT1/ptm/m/it on input line 35.
LaTeX Info: Redefining \hbar on input line 50.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\courier.sty"
Package: courier 2005/04/12 PSNFSS-v9.2a (WaS)
)
("C:\Program Files\MiKTeX 2.7\tex\latex\luxi\luximono.sty"
Package: luximono 2004/01/26 loading LuxiMono as tt font (WaS)
)
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\babel.sty"
Package: babel 2005/11/23 v3.8h The Babel package
*************************************
* Local config file bblopts.cfg used
*
("C:\Program Files\MiKTeX 2.7\tex\latex\00miktex\bblopts.cfg"
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
)
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\ngermanb.ldf"
Language: ngermanb 2004/02/20 v2.6m new German support from the babel system
("C:\Program Files\MiKTeX 2.7\tex\generic\babel\babel.def"
File: babel.def 2005/11/23 v3.8h Babel common definitions
\babel@savecnt=\count92
\U@D=\dimen118
)
\l@naustrian = a dialect from \language\l@ngerman
Package babel Info: Making " an active character on input line 92.
)) (BSP.aux)
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 10.
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 10.
LaTeX Font Info: Try loading font information for TS1+cmr on input line 10.
Hier der letzte Teil weil ich es nciht unter einmal posten kann:
("C:\Program Files\MiKTeX 2.7\tex\latex\base\ts1cmr.fd"
File: ts1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 10.
LaTeX Font Info: Try loading font information for T1+ptm on input line 10.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\t1ptm.fd"
File: t1ptm.fd 2001/06/04 font definitions for T1/ptm.
)
\big@size=\dimen119
LaTeX Font Info: Try loading font information for OT1+ztmcm on input line 12
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\ot1ztmcm.fd"
File: ot1ztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OT1/ztmcm.
)
LaTeX Font Info: Try loading font information for OML+ztmcm on input line 12
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omlztmcm.fd"
File: omlztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OML/ztmcm.
)
LaTeX Font Info: Try loading font information for OMS+ztmcm on input line 12
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omsztmcm.fd"
File: omsztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMS/ztmcm.
)
LaTeX Font Info: Try loading font information for OMX+ztmcm on input line 12
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omxztmcm.fd"
File: omxztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMX/ztmcm.
)
LaTeX Font Info: Try loading font information for OT1+ptm on input line 12.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\ot1ptm.fd"
File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
)
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10.95> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 12.
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <8> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 12.
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <6> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 12.
[1
] (BSP.aux) )
Here is how much of TeX's memory you used:
2464 strings out of 95341
32364 string characters out of 1184199
90465 words of memory out of 1500000
5635 multiletter control sequences out of 110000
14483 words of font info for 35 fonts, out of 1200000 for 2000
14 hyphenation exceptions out of 8191
34i,6n,36p,217b,146s stack positions out of 5000i,500n,10000p,200000b,5000s
Output written on BSP.dvi (1 page, 432 bytes).
Kann mir hier wirklich niemand helfen??
Da stimmt doch was mit dem Programm nicht!
Soll ich es deinstallieren und es noch mal downloaden???
Bitte um Hilfe!!
Was kann hier nicht stimmen?
Bitte um Hilfe!!
Was kann hier nicht stimmen?
Jetzt lass dieses Beispiel laufen und zwar einmal mit
pdflatex und einmal mit latex und schicke dann beide logdateien.
Du musst allerdings nach pdflatex die logdatei umbenennen,
denn der nächste latex-Lauf würde sie überschreiben.
\listfiles
\documentclass{article}
\usepackage[T1]{fontenc}
\usepackage{mathptmx}
\usepackage[scaled]{helvet}
\usepackage{amsmath}
\begin{document}
$ \int{x}dx $
\end{document}
Herbert
Dein BSp. funktiuoniert!!!
Hier die LOgdatei, aber was ist denn der Unterschied zw. LATEX und pdflatex????
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 6 JUL 2008 13:54
entering extended mode
**BSP.tex
(BSP.tex
LaTeX2e <2005/12/01>
Babel <v3.8h> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, french, loaded.
("C:\Program Files\MiKTeX 2.7\tex\latex\base\article.cls"
Document Class: article 2005/09/16 v1.4f Standard LaTeX document class
("C:\Program Files\MiKTeX 2.7\tex\latex\base\size10.clo"
File: size10.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
("C:\Program Files\MiKTeX 2.7\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files\MiKTeX 2.7\tex\latex\base\t1enc.def"
File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
))
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\mathptmx.sty"
Package: mathptmx 2005/04/12 PSNFSS-v9.2a Times w/ Math, improved (SPQR, WaS)
LaTeX Font Info: Redeclaring symbol font `operators' on input line 28.
LaTeX Font Info: Overwriting symbol font `operators' in version `normal'
(Font) OT1/cmr/m/n --> OT1/ztmcm/m/n on input line 28.
LaTeX Font Info: Overwriting symbol font `operators' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/ztmcm/m/n on input line 28.
LaTeX Font Info: Redeclaring symbol font `letters' on input line 29.
LaTeX Font Info: Overwriting symbol font `letters' in version `normal'
(Font) OML/cmm/m/it --> OML/ztmcm/m/it on input line 29.
LaTeX Font Info: Overwriting symbol font `letters' in version `bold'
(Font) OML/cmm/b/it --> OML/ztmcm/m/it on input line 29.
LaTeX Font Info: Redeclaring symbol font `symbols' on input line 30.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/cmsy/m/n --> OMS/ztmcm/m/n on input line 30.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/cmsy/b/n --> OMS/ztmcm/m/n on input line 30.
LaTeX Font Info: Redeclaring symbol font `largesymbols' on input line 31.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal'
(Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold'
(Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31.
\symbold=\mathgroup4
\symitalic=\mathgroup5
LaTeX Font Info: Redeclaring math alphabet \mathbf on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal'
(Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34.
LaTeX Font Info: Redeclaring math alphabet \mathit on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal'
(Font) OT1/cmr/m/it --> OT1/ptm/m/it on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold'
(Font) OT1/cmr/bx/it --> OT1/ptm/m/it on input line 35.
LaTeX Info: Redefining \hbar on input line 50.
)
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\helvet.sty"
Package: helvet 2005/04/12 PSNFSS-v9.2a (WaS)
("C:\Program Files\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
))
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsmath.sty"
Package: amsmath 2000/07/18 v2.13 AMS math features
\@mathmargin=\skip43
For additional information on amsmath, use the `?' option.
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amstext.sty"
Package: amstext 2000/06/29 v2.01
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsgen.sty"
File: amsgen.sty 1999/11/30 v2.0
\@emptytoks=\toks15
\ex@=\dimen103
))
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsbsy.sty"
Package: amsbsy 1999/11/29 v1.2d
\pmbraise@=\dimen104
)
("C:\Program Files\MiKTeX 2.7\tex\latex\amsmath\amsopn.sty"
Package: amsopn 1999/12/14 v2.01 operator names
)
\inf@bad=\count87
LaTeX Info: Redefining \frac on input line 211.
\uproot@=\count88
\leftroot@=\count89
LaTeX Info: Redefining \overline on input line 307.
\classnum@=\count90
\DOTSCASE@=\count91
LaTeX Info: Redefining \ldots on input line 379.
LaTeX Info: Redefining \dots on input line 382.
LaTeX Info: Redefining \cdots on input line 467.
\Mathstrutbox@=\box26
\strutbox@=\box27
\big@size=\dimen105
LaTeX Font Info: Redeclaring font encoding OML on input line 567.
LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
\macc@depth=\count92
\c@MaxMatrixCols=\count93
\dotsspace@=\muskip10
\c@parentequation=\count94
\dspbrk@lvl=\count95
\tag@help=\toks16
\row@=\count96
\column@=\count97
\maxfields@=\count98
\andhelp@=\toks17
\eqnshift@=\dimen106
\alignsep@=\dimen107
\tagshift@=\dimen108
\tagwidth@=\dimen109
\totwidth@=\dimen110
\lineht@=\dimen111
\@envbody=\toks18
\multlinegap=\skip44
\multlinetaggap=\skip45
\mathdisplay@stack=\toks19
LaTeX Info: Redefining \[ on input line 2666.
LaTeX Info: Redefining \] on input line 2667.
) (BSP.aux)
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 9.
LaTeX Font Info: ... okay on input line 9.
LaTeX Font Info: Try loading font information for T1+ptm on input line 9.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\t1ptm.fd"
File: t1ptm.fd 2001/06/04 font definitions for T1/ptm.
)
LaTeX Font Info: Try loading font information for OT1+ztmcm on input line 11
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\ot1ztmcm.fd"
File: ot1ztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OT1/ztmcm.
)
LaTeX Font Info: Try loading font information for OML+ztmcm on input line 11
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omlztmcm.fd"
File: omlztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OML/ztmcm.
)
LaTeX Font Info: Try loading font information for OMS+ztmcm on input line 11
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omsztmcm.fd"
File: omsztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMS/ztmcm.
)
LaTeX Font Info: Try loading font information for OMX+ztmcm on input line 11
.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\omxztmcm.fd"
File: omxztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMX/ztmcm.
)
LaTeX Font Info: Try loading font information for OT1+ptm on input line 11.
("C:\Program Files\MiKTeX 2.7\tex\latex\psnfss\ot1ptm.fd"
File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
)
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 11.
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7.4> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 11.
LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <6> not available
(Font) Font shape `OT1/ptm/b/n' tried instead on input line 11.
[1
] (BSP.aux)
*File List*
article.cls 2005/09/16 v1.4f Standard LaTeX document class
size10.clo 2005/09/16 v1.4f Standard LaTeX file (size option)
fontenc.sty
t1enc.def 2005/09/27 v1.99g Standard LaTeX file
mathptmx.sty 2005/04/12 PSNFSS-v9.2a Times w/ Math, improved (SPQR, WaS)
helvet.sty 2005/04/12 PSNFSS-v9.2a (WaS)
keyval.sty 1999/03/16 v1.13 key=value parser (DPC)
amsmath.sty 2000/07/18 v2.13 AMS math features
amstext.sty 2000/06/29 v2.01
amsgen.sty 1999/11/30 v2.0
amsbsy.sty 1999/11/29 v1.2d
amsopn.sty 1999/12/14 v2.01 operator names
t1ptm.fd 2001/06/04 font definitions for T1/ptm.
ot1ztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OT1/ztmcm.
omlztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OML/ztmcm.
omsztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMS/ztmcm.
omxztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMX/ztmcm.
ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
***********
)
Here is how much of TeX's memory you used:
1184 strings out of 95341
12269 string characters out of 1184199
57369 words of memory out of 1500000
4399 multiletter control sequences out of 110000
14177 words of font info for 34 fonts, out of 1200000 for 2000
14 hyphenation exceptions out of 8191
27i,4n,23p,199b,117s stack positions out of 5000i,500n,10000p,200000b,5000s
Output written on BSP.dvi (1 page, 404 bytes).
Dein BSp. funktiuoniert!!!
Hier die LOgdatei, aber was ist denn der Unterschied zw. LATEX und pdflatex????
This is pdfTeX, Version 3.141592-1.40.4 (MiKTeX 2.7) (preloaded format=latex 2007.12.29) 6 JUL 2008 13:54
wenn es funktioniert, brauche ich natürlich kein logfile ...
Was ist nun mit dem pdflatex-Lauf, funktioniert es da auch??
Herbert
Ja, als pdf funktioniert es auch, aber ich hab jetzt ein anderes Dokument geschrieben und hatte da ein paar Probleme, ich hab als usepackages dien musterbeispiel genommen, aber es gab folgende Probleme:
1, Griechische Buchstaben werden nicht mehr als solche angezeigt, zum Beispiel stellt es mir statt einem alpha ein a an und statt omega ein w!! Wenn ich aber anstatt \documentclass{article} es so schreibe wie in den ganzen Tutorials und zwar: \documentclass{scrartcl} dann werden die griechischen Zeichen richtig dargestellt aber über die Hälfte der Formeln werden falsch dargestellt!
2, Ich konnte keine e Funktion entdecken, also mit der eulerschen Zahl als Basis! Gibts sowas nicht oder hab ich sie irgendwo übersehen?
3, Es giubt auch keine Signum Funktion!
4, Es zeigt mir über 40 Fehler an, obwohl ich maximal 10 haben sollte, wegen den fehlerhaften eFunktionen!
Zum Beispiel zeigt es mir an, dass ich die Formeln mit $ umschließen soll, obwohl ich sie in eine align Umgebung reingetan habe!
Was stimmt dabei nicht?
Ja, als pdf funktioniert es auch, aber ich hab jetzt ein anderes Dokument geschrieben und hatte da ein paar Probleme, ich hab als usepackages dien musterbeispiel genommen, aber es gab folgende Probleme:
1, Griechische Buchstaben werden nicht mehr als solche angezeigt, zum Beispiel stellt es mir statt einem alpha ein a an und statt omega ein w!! Wenn ich aber anstatt \documentclass{article} es so schreibe wie in den ganzen Tutorials und zwar: \documentclass{scrartcl} dann werden die griechischen Zeichen richtig dargestellt aber über die Hälfte der Formeln werden falsch dargestellt!
2, Ich konnte keine e Funktion entdecken, also mit der eulerschen Zahl als Basis! Gibts sowas nicht oder hab ich sie irgendwo übersehen?
3, Es giubt auch keine Signum Funktion!
4, Es zeigt mir über 40 Fehler an, obwohl ich maximal 10 haben sollte, wegen den fehlerhaften eFunktionen!
Zum Beispiel zeigt es mir an, dass ich die Formeln mit $ umschließen soll, obwohl ich sie in eine align Umgebung reingetan habe!
Was stimmt dabei nicht?
ich habe keine Lust mehr, das geht bei dir alles wild durcheinander.
So kann man nicht helfen.
Herbert
Schmeiß dein komplettes TeX-System runter und installier das erst mal nicht mehr. Dann besorgst du dir ein gutes Buch zu dem Thema oder liest alternativ ein paar vernünftige Tutorials (und zwar aufmerksam). Du solltest dann ein ungefähres Verständnis dafür haben, wie das LaTeX-System ungefähr funktioniert und was du eigentlich tust, wenn du so ein usepackage verwendest.
Dann kannst du wieder hergehen und (ebenfalls nach Anleitung!) mal wieder MikTeX plus Editor installieren.
Alternativ besorgst du dir nen Bekannten mit Erfahrung auf diesem Gebiet und größere Mengen an Bier zur Entschädigung seines Frusts.
Ich weiß wie LATEX ungefähr funktioniert und cih hab auch schon 3 verschiedene Tutorials udn Anleitungen gelesen, aber das Problem is, dass wenn ich sogar eine Musterdatei aus so einem Tutorial kopiere und einfüge funktioniert nicht mal das und da kann ich ja kaum was falsch amchen, oder nicht???
Darum auch die Empfehlung, alles restlos runterzuschmeißen und noch mal von vorn anzufangen. Denn da scheint irgendwas mit den Schriften ordentlich danebengegangen zu sein.
Kann ich dabei die schon einmal runtergeladenen Dateinen wieder verwenden oder muss ich das neu downloaden?
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.