MicTex 2.5

[derökonom]

Hallo,

bevor ich einen Sch... mache, möchte ich hier im Forum nachfragen, damit ich abgesichert bin.

Ich arbeite mit TexnicCenter und MicTex 2.5 (ja, leider).
Ich habe das ganze vor einiger Zeit installiert, nun möchte ich neue Pakete hinzufügen (allerdings geht dies nicht mehr, da die Version 2.5 nicht mehr unterstützt wird).

Daher meine Frage: Wenn ich nun MicTex 2.7 installieren, auf was muss ich alles achten, damit mein Dokument dann auch noch funktioniert, etc.

Oder kann ich einfach installieren, und dann funktioniert alles (also auch das installieren von neuen paketen?)

DAnke für Hinweise.
lg

[mechanicus]

Oder kann ich einfach installieren, und dann funktioniert alles (also auch das installieren von neuen paketen?)
Hallo,

du kannst einfach installieren.

Gruß
Marco

[derökonom]

sorry, für meine "dummen" fragen, aber ich kenne mich wirklich nicht gut aus mit diesen dingen.

1. wie stelle ich mein texniccenter nun auf miktex 2.7 um?
2. wie nehme ich die "alten" packages mit?

danke für die hilfe.
lg

[mechanicus]

Hallo,

vielleicht ein paar Hinweise, du hast ja wahrscheinlich noch TexnicCenter 7.5beta. Deinstalliere es und nutze die neue Version: release 1 (http://sourceforge.net/project/showfiles.php?group_id=36323&package_id=28512)
Allerdings installiere zuvor MikTex 2.7. Grund. Wenn MikTex installiert ist, dann fragt TexnicCenter beim ersten Start, wo es Miktex findet. So hast du TexnicCenter und Miktex schon bekannt gemacht. Außerdem empfehle ich auch vor der Installation von TC Ghostscript /Ghostview und den neuen Adobe zu installieren.

Zu deiner zweiten Frage: Hast du eigene Pakete bzw Schriften oder jegliches? Wenn nein, dann ist bei der MikTex-Installation full alles dabei.

Gruß
Marco

[derökonom]

danke für deine hilfe.

ich hab alles gemacht, was du gesagt hast.

also ich hab jetzt mixtec 2.7, und texniccenter 1.

allerdings habe ich jetzt ziemlich viele fehler im dokument:

zuerst hat alles funktioniert (außer das F7 seltsamer nicht mehr zum kompilieren ging, sonder nur strg+F7). ich bekam allerdings wenigstens ein pdf-file ohne probleme, alles war so wie ich es kannte (im dokument) und beim kompilieren.

jetzt habe ich allerdings zum 4. oder 5. mal kompiliert und auf einmal habe ich 300 fehler!!

ich weiss gar nicht wo ich anfangen soll.

hast du irgendwelche hinweise?
danke

[mechanicus]

Hallo,

ist das bei jedem Beispiel:

\documentclass{scrreprt}

\begin{document}
Hello World!
\end{document}
Ansonsten musst du uns schon die Fehler sagen. Am besten ist es, die Log-Datei hier rein zustellen.

Gruß
Marco

[derökonom]

meiner literatur sein?

auf jeden fall kann ich bibtex nicht mehr laufen lassen
(der button kann nicht angeklickt werden)

[mechanicus]

meiner literatur sein?

auf jeden fall kann ich bibtex nicht mehr laufen lassen
(der button kann nicht angeklickt werden)

Das Button-Problem :D Wie gesagt, zeige bitte erst die Log-Datei.

Gruß
Marco

[derökonom]

bevor ich wieder einen blödsinn mache:

wie finde ich die "log-datei" und wie stelle ich sie hier am besten rein?

vielen dank für deine geduld und schnellen antworten.

[derökonom]

hab ich dich nun vergrämt?

verzweiflung, nix auskenn.

[Donalduck]

Die log Datei ist im selben Ordner wie deine .tex Datei, nur mit der Endung .log

[mechanicus]

hab ich dich nun vergrämt?

verzweiflung, nix auskenn.

Nein :D:D

Gruß
Marco

[derökonom]

ich glaube nun geht es wieder.

das problem war, dass ich die tex dateien nicht als "projekt" geöffnet habe.
nun sollte alles funktionieren.

danke einstweilen.
sollte es doch noch probleme geben, melde ich mich nochmal

[derökonom]

ich kann kompilieren, dass pdf öffnen usw.

allerdings kommt dann nach einiger zeit die fehlermeldung:

hier ist das log file:
This is pdfTeX, Version 3.1415926-1.40.9 (MiKTeX 2.7) (preloaded format=pdflatex 2009.3.17) 17 MAR 2009 18:09
entering extended mode
**C:/Dokumente*und*Einstellungen/Phil/Eigene*Dateien/DISSERTATIONGANZNEU/DISSER
TATIONGANZNEU.tex

("C:/Dokumente und Einstellungen/Phil/Eigene Dateien/DISSERTATIONGANZNEU/DISSER
TATIONGANZNEU.tex"
LaTeX2e <2005/12/01>
Babel <v3.8l> and hyphenation patterns for english, dumylang, nohyphenation, ge
rman, ngerman, german-x-2008-06-18, ngerman-x-2008-06-18, french, loaded.
("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\scrbook.cls"
Document Class: scrbook 2009/01/24 v3.02b KOMA-Script document class (book)
("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2009/01/24 v3.02b KOMA-Script package (KOMA-Script-dependent
basics and keyval usage)

("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\scrbase.sty"
Package: scrbase 2009/01/24 v3.02b KOMA-Script package (KOMA-Script-independent
basics and keyval usage)

("C:\Programme\MiKTeX 2.7\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2008/07/09 v3.00 KOMA-Script package (loading files)

Package scrlfile, 2008/07/09 v3.00 KOMA-Script package (loading files)
Copyright (C) Markus Kohm

))) ("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\tocbasic.sty"
Package: tocbasic 2009/01/20 v3.02a(package)
)
Package tocbasic Info: omitting babel extension for `toc'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `toc' on input line 114.
Package tocbasic Info: omitting babel extension for `lof'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `lof' on input line 115.
Package tocbasic Info: omitting babel extension for `lot'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `lot' on input line 116.
Package scrbook Info: You've used obsolete option `12pt'.
(scrbook) \KOMAExecuteOptions{fontsize=12pt} will be
(scrbook) used instead.
(scrbook) You may simply replace `12pt'
(scrbook) by `fontsize=12pt'.
Class scrbook Info: You've used standard option `oneside'.
(scrbook) This is correct!
(scrbook) Internaly I'm using `twoside=false'.
(scrbook) If you'd like to set the option with \KOMAoptions,
(scrbook) you'd have to use `twoside=false' there
(scrbook) instead of `oneside', too.
Class scrbook Info: File `scrsize12pt.clo' used to setup font sizes on input li
ne 1261.

("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\scrsize12pt.clo"
File: scrsize12pt.clo 2009/01/24 v3.02b KOMA-Script font size class option (12p
t)
)
("C:\Programme\MiKTeX 2.7\tex\latex\koma-script\typearea.sty"
Package: typearea 2009/01/24 v3.02b KOMA-Script package (type area)

Package typearea, 2009/01/24 v3.02b KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-

\ta@bcor=\skip41
\ta@div=\count79
Package typearea Info: You've used standard option `oneside'.
(typearea) This is correct!
(typearea) Internaly I'm using `twoside=false'.
(typearea) If you'd like to set the option with \KOMAoptions,
(typearea) you'd have to use `twoside=false' there
(typearea) instead of `oneside', too.
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 12
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 448.13095pt
(typearea) DIV departure = -6%
(typearea) \evensidemargin = 2.4185pt
(typearea) \oddsidemargin = 2.4185pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 635.5pt
(typearea) \topmargin = -41.72441pt
(typearea) \headheight = 18.125pt
(typearea) \headsep = 21.75pt
(typearea) \topskip = 12.0pt
(typearea) \footskip = 50.75pt
(typearea) \baselineskip = 14.5pt
(typearea) on input line 1042.
)
\c@part=\count80
\c@chapter=\count81
\c@section=\count82
\c@subsection=\count83
\c@subsubsection=\count84
\c@paragraph=\count85
\c@subparagraph=\count86
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count87
\c@table=\count88
\bibindent=\dimen102
) ("C:\Programme\MiKTeX 2.7\tex\latex\amsmath\amsmath.sty"
Package: amsmath 2000/07/18 v2.13 AMS math features
\@mathmargin=\skip47

For additional information on amsmath, use the `?' option.
("C:\Programme\MiKTeX 2.7\tex\latex\amsmath\amstext.sty"
Package: amstext 2000/06/29 v2.01

("C:\Programme\MiKTeX 2.7\tex\latex\amsmath\amsgen.sty"
File: amsgen.sty 1999/11/30 v2.0
\@emptytoks=\toks15
\ex@=\dimen103
))
("C:\Programme\MiKTeX 2.7\tex\latex\amsmath\amsbsy.sty"
Package: amsbsy 1999/11/29 v1.2d
\pmbraise@=\dimen104
)
("C:\Programme\MiKTeX 2.7\tex\latex\amsmath\amsopn.sty"
Package: amsopn 1999/12/14 v2.01 operator names
)
\inf@bad=\count89
LaTeX Info: Redefining \frac on input line 211.
\uproot@=\count90
\leftroot@=\count91
LaTeX Info: Redefining \overline on input line 307.
\classnum@=\count92
\DOTSCASE@=\count93
LaTeX Info: Redefining \ldots on input line 379.
LaTeX Info: Redefining \dots on input line 382.
LaTeX Info: Redefining \cdots on input line 467.
\Mathstrutbox@=\box27
\strutbox@=\box28
\big@size=\dimen105
LaTeX Font Info: Redeclaring font encoding OML on input line 567.
LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
\macc@depth=\count94
\c@MaxMatrixCols=\count95
\dotsspace@=\muskip10
\c@parentequation=\count96
\dspbrk@lvl=\count97
\tag@help=\toks16
\row@=\count98
\column@=\count99
\maxfields@=\count100
\andhelp@=\toks17
\eqnshift@=\dimen106
\alignsep@=\dimen107
\tagshift@=\dimen108
\tagwidth@=\dimen109
\totwidth@=\dimen110
\lineht@=\dimen111
\@envbody=\toks18
\multlinegap=\skip48
\multlinetaggap=\skip49
\mathdisplay@stack=\toks19
LaTeX Info: Redefining \[ on input line 2666.
LaTeX Info: Redefining \] on input line 2667.
)
("C:\Programme\MiKTeX 2.7\tex\latex\harvard\harvard.sty"
Package: harvard

("C:\Programme\MiKTeX 2.7\tex\latex\base\ifthen.sty"
Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC)
)
("C:\Programme\MiKTeX 2.7\tex\latex\latex2html\html.sty"
("C:\Programme\MiKTeX 2.7\tex\latex\hyperref\hyperref.sty"
Package: hyperref 2009/02/22 v6.78p Hypertext links for LaTeX

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\ifpdf.sty"
Package: ifpdf 2007/12/12 v1.6 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in pdf mode detected.
)
("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\ifvtex.sty"
Package: ifvtex 2008/11/04 v1.4 Switches for detecting VTeX and its modes (HO)
Package ifvtex Info: VTeX not detected.
)
("C:\Programme\MiKTeX 2.7\tex\latex\ifxetex\ifxetex.sty"
Package: ifxetex 2009/01/23 v0.5 Provides ifxetex conditional
)
("C:\Programme\MiKTeX 2.7\tex\latex\oberdiek\hycolor.sty"
Package: hycolor 2008/09/08 v1.4 Code for color options of hyperref/bookmark (H
O)

("C:\Programme\MiKTeX 2.7\tex\latex\oberdiek\xcolor-patch.sty"
Package: xcolor-patch 2008/09/08 xcolor patch
))
\@linkdim=\dimen112
\Hy@linkcounter=\count101
\Hy@pagecounter=\count102

("C:\Programme\MiKTeX 2.7\tex\latex\hyperref\pd1enc.def"
File: pd1enc.def 2009/02/22 v6.78p Hyperref: PDFDocEncoding definition (HO)
)
("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\etexcmds.sty"
Package: etexcmds 2007/12/12 v1.2 Prefix for e-TeX command names (HO)

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\infwarerr.sty"
Package: infwarerr 2007/09/09 v1.2 Providing info/warning/message (HO)
)
Package etexcmds Info: Could not find \expanded.
(etexcmds) That can mean that you are not using pdfTeX 1.50 or
(etexcmds) that some package has redefined \expanded.
(etexcmds) In the latter case, load this package earlier.
)
("C:\Programme\MiKTeX 2.7\tex\latex\00miktex\hyperref.cfg"
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
("C:\Programme\MiKTeX 2.7\tex\latex\oberdiek\kvoptions.sty"
Package: kvoptions 2007/10/18 v3.0 Keyval support for LaTeX options (HO)
)
Package hyperref Info: Hyper figures OFF on input line 2935.
Package hyperref Info: Link nesting OFF on input line 2940.
Package hyperref Info: Hyper index ON on input line 2943.
Package hyperref Info: Plain pages OFF on input line 2950.
Package hyperref Info: Backreferencing OFF on input line 2955.

Implicit mode ON; LaTeX internals redefined
Package hyperref Info: Bookmarks ON on input line 3145.
("C:\Programme\MiKTeX 2.7\tex\latex\ltxmisc\url.sty"
\Urlmuskip=\muskip11
Package: url 2006/04/12 ver 3.3 Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 3382.

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\bitset.sty"
Package: bitset 2007/09/28 v1.0 Data type bit set (HO)

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\intcalc.sty"
Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO)
)
("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\bigintcalc.sty"
Package: bigintcalc 2007/11/11 v1.1 Expandable big integer calculations (HO)

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\pdftexcmds.sty"
Package: pdftexcmds 2007/12/12 v0.3 LuaTeX support for pdfTeX utility functions
(HO)
Package pdftexcmds Info: LuaTeX not detected on input line 139.
)))
("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\kvsetkeys.sty"
Package: kvsetkeys 2007/09/29 v1.3 Key value parser with default handler suppor
t (HO)
)
\Fld@menulength=\count103
\Field@Width=\dimen113
\Fld@charsize=\dimen114
\Field@toks=\toks20
Package hyperref Info: Hyper figures OFF on input line 4299.
Package hyperref Info: Link nesting OFF on input line 4304.
Package hyperref Info: Hyper index ON on input line 4307.
Package hyperref Info: backreferencing OFF on input line 4314.
Package hyperref Info: Link coloring OFF on input line 4319.
Package hyperref Info: Link coloring with OCG OFF on input line 4324.
Package hyperref Info: PDF/A mode OFF on input line 4329.

("C:\Programme\MiKTeX 2.7\tex\generic\oberdiek\atbegshi.sty"
Package: atbegshi 2008/07/31 v1.9 At begin shipout hook (HO)
)
\Hy@abspage=\count104
\c@Item=\count105
\c@Hfootnote=\count106
)
*hyperref using default driver hpdftex*
("C:\Programme\MiKTeX 2.7\tex\latex\hyperref\hpdftex.def"
File: hpdftex.def 2009/02/22 v6.78p Hyperref driver for pdfTeX
\Fld@listcount=\count107
)
Package: html 1999/07/19 v1.38 hypertext commands for latex2html (nd, hws, rrm)

\c@lpart=\count108
\c@lchapter=\count109
\c@lsection=\count110
\c@lsubsection=\count111
\c@lsubsubsection=\count112
\c@lparagraph=\count113
\c@lsubparagraph=\count114
\c@lsubsubparagraph=\count115
\ptrfile=\write3
))
("C:\Programme\MiKTeX 2.7\tex\latex\amsfonts\amsfonts.sty"
Package: amsfonts 2001/10/25 v2.2f
\symAMSa=\mathgroup4
\symAMSb=\mathgroup5
LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
(Font) U/euf/m/n --> U/euf/b/n on input line 132.
)
("C:\Programme\MiKTeX 2.7\tex\latex\amsfonts\amssymb.sty"
Package: amssymb 2002/01/22 v2.2d
)
("C:\Programme\MiKTeX 2.7\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)

("C:\Programme\MiKTeX 2.7\tex\latex\graphics\graphics.sty"
Package: graphics 2006/02/20 v1.0o Standard LaTeX Graphics (DPC,SPQR)

("C:\Programme\MiKTeX 2.7\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Programme\MiKTeX 2.7\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: pdftex.def on input line 90.

("C:\Programme\MiKTeX 2.7\tex\latex\pdftex-def\pdftex.def"
File: pdftex.def 2008/09/08 v0.04l Graphics/color for pdfTeX
\Gread@gobject=\count116
))
\Gin@req@height=\dimen115
\Gin@req@width=\dimen116
)
("C:\Programme\MiKTeX 2.7\tex\latex\setspace\setspace.sty"
Package: setspace 2000/12/01 6.7 Contributed and Supported LaTeX2e package

[derökonom]

Package: `setspace' 6.7 <2000/12/01>
) ("C:\Programme\MiKTeX 2.7\tex\generic\babel\babel.sty"
Package: babel 2008/07/06 v3.8l The Babel package

*************************************
* Local config file bblopts.cfg used
*
("C:\Programme\MiKTeX 2.7\tex\latex\00miktex\bblopts.cfg"
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
)
("C:\Programme\MiKTeX 2.7\tex\generic\babel\english.ldf"
Language: english 2005/03/30 v3.3o English support from the babel system

("C:\Programme\MiKTeX 2.7\tex\generic\babel\babel.def"
File: babel.def 2008/07/06 v3.8l Babel common definitions
\babel@savecnt=\count117
\U@D=\dimen117
)
\l@canadian = a dialect from \language\l@american
\l@australian = a dialect from \language\l@british
\l@newzealand = a dialect from \language\l@british
))
("C:\Programme\MiKTeX 2.7\tex\latex\ltxmisc\capt-of.sty")
("C:\Programme\MiKTeX 2.7\tex\latex\booktabs\booktabs.sty"
Package: booktabs 2005/04/14 v1.61803 publication quality tables
\heavyrulewidth=\dimen118
\lightrulewidth=\dimen119
\cmidrulewidth=\dimen120
\belowrulesep=\dimen121
\belowbottomsep=\dimen122
\aboverulesep=\dimen123
\abovetopsep=\dimen124
\cmidrulesep=\dimen125
\cmidrulekern=\dimen126
\defaultaddspace=\dimen127
\@cmidla=\count118
\@cmidlb=\count119
\@aboverulesep=\dimen128
\@belowrulesep=\dimen129
\@thisruleclass=\count120
\@lastruleclass=\count121
\@thisrulewidth=\dimen130
)
("C:\Programme\MiKTeX 2.7\tex\latex\ltxmisc\framed.sty"
Package: framed 2007/10/04 v 0.95: framed or shaded text with page breaks
\fb@frw=\dimen131
\fb@frh=\dimen132
\FrameRule=\dimen133
\FrameSep=\dimen134
)
("C:\Programme\MiKTeX 2.7\tex\latex\footmisc\footmisc.sty"
Package: footmisc 2007/06/12 v5.4a a miscellany of footnote facilities
\FN@temptoken=\toks21
\footnotemargin=\dimen135


LaTeX Warning: Command \@footnotetext has changed.
Check if current package is valid.

\c@pp@next@reset=\count122
Package footmisc Info: Declaring symbol style bringhurst on input line 910.
Package footmisc Info: Declaring symbol style chicago on input line 918.
Package footmisc Info: Declaring symbol style wiley on input line 927.
Package footmisc Info: Declaring symbol style lamport-robust on input line 938.

Package footmisc Info: Declaring symbol style lamport* on input line 958.
Package footmisc Info: Declaring symbol style lamport*-robust on input line 979
.
) ("C:\Programme\MiKTeX 2.7\tex\latex\base\textcomp.sty"
Package: textcomp 2005/09/27 v1.99g Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71.

("C:\Programme\MiKTeX 2.7\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
)
LaTeX Info: Redefining \oldstylenums on input line 266.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281.
Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282.
Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283.
Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284.
Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285.
Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286.
Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287.
Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288.
Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289.
Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290.
Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291.
Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292.
Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293.
Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294.
Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295.
Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296.
Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297.
Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298.
Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299.
Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300.
Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301.
Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302.
Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303.
Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304.

Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305.
Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306.
Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307.
Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308.
Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309.
Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310.
Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 311.
Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 312.
Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 313.
Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 314.
Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 315.
Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 316.
Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 317.
Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 318.
Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 319.
Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 320.
Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 321.
Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 322.
Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 323.
Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 324.
Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 325.
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 326.
)
("C:\Programme\MiKTeX 2.7\tex\latex\rotating\rotating.sty"
Package: rotating 2008/10/05 v2.15c rotated objects in LaTeX
\c@r@tfl@t=\count123
\rotFPtop=\skip50
\rotFPbot=\skip51
\rot@float@box=\box29
\rot@mess@toks=\toks22
)
("C:\Programme\MiKTeX 2.7\tex\latex\fancyhdr\fancyhdr.sty"
\fancy@headwidth=\skip52
\f@ncyO@elh=\skip53
\f@ncyO@erh=\skip54
\f@ncyO@olh=\skip55
\f@ncyO@orh=\skip56
\f@ncyO@elf=\skip57
\f@ncyO@erf=\skip58
\f@ncyO@olf=\skip59
\f@ncyO@orf=\skip60
)
("C:\Programme\MiKTeX 2.7\tex\latex\base\inputenc.sty"
Package: inputenc 2006/05/05 v1.1b Input encoding file
\inpenc@prehook=\toks23
\inpenc@posthook=\toks24

("C:\Programme\MiKTeX 2.7\tex\latex\base\ansinew.def"
File: ansinew.def 2006/05/05 v1.1b Input encoding file
))
("C:\Programme\MiKTeX 2.7\tex\latex\xcolor\xcolor.sty"
Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)

("C:\Programme\MiKTeX 2.7\tex\latex\00miktex\color.cfg"
File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
)
Package xcolor Info: Driver file: pdftex.def on input line 225.

("C:\Programme\MiKTeX 2.7\tex\latex\colortbl\colortbl.sty"
Package: colortbl 2001/02/13 v0.1j Color table columns (DPC)

("C:\Programme\MiKTeX 2.7\tex\latex\tools\array.sty"
Package: array 2005/08/23 v2.4b Tabular extension package (FMi)
\col@sep=\dimen136
\extrarowheight=\dimen137
\NC@list=\toks25
\extratabsurround=\skip61
\backup@length=\skip62
)
\everycr=\toks26
\minrowclearance=\skip63
)
\rownum=\count124
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337.
Package xcolor Info: Model `hsb' substituted by `rgb' on input line 1341.
Package xcolor Info: Model `RGB' extended on input line 1353.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355.
Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356.
Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358.
Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359.
Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360.
)
\c@theorem=\count125

(DISSERTATIONGANZNEU.aux)
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 121.
LaTeX Font Info: ... okay on input line 121.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 121.
LaTeX Font Info: Try loading font information for TS1+cmr on input line 121.

("C:\Programme\MiKTeX 2.7\tex\latex\base\ts1cmr.fd"
File: ts1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 121.
Package hyperref Info: Link coloring OFF on input line 121.

("C:\Programme\MiKTeX 2.7\tex\latex\hyperref\nameref.sty"
Package: nameref 2007/05/29 v2.31 Cross-referencing by name of section

("C:\Programme\MiKTeX 2.7\tex\latex\oberdiek\refcount.sty"
Package: refcount 2008/08/11 v3.1 Data extraction from references (HO)
)
\c@section@level=\count126
)
LaTeX Info: Redefining \ref on input line 121.
LaTeX Info: Redefining \pageref on input line 121.

(DISSERTATIONGANZNEU.out) (DISSERTATIONGANZNEU.out
! I can't write on file `DISSERTATIONGANZNEU.pdf'.
Please type another file name for output
! Emergency stop.
\Hy@OutlineName ...utline goto name{#2}count#3{#4}

l.1 \BOOKMARK [0][-]{chapter*.1}{List of Tables}{}

*** (job aborted, file error in nonstop mode)


Here is how much of TeX's memory you used:
9258 strings out of 95304
130858 string characters out of 1183180
225514 words of memory out of 1500000
12358 multiletter control sequences out of 110000
3938 words of font info for 15 fonts, out of 3000000 for 5000
14 hyphenation exceptions out of 8191
57i,1n,43p,419b,1454s stack positions out of 5000i,500n,10000p,200000b,50000s
! ==> Fatal error occurred, no output PDF file produced!

[mechanicus]

Hallo,

ewige log :D es empfiehlt sich, diese als txt-Datei anzuhängen. So wie es scheint, öffnet er die pdfdatei nicht. Das liegt wohl an den Einstellungen für TexniCenter. Drücke Alt+F7 und vergleiche mal mit der Abbildung hier von Beitrag 8
http://www.matheplanet.com/matheplanet/nuke/html/viewtopic.php?topic=119384&start=0&lps=870540#v870540

Gruß
Marco

[derökonom]

den hinweise.

damit bin ich allerdings nicht weitergekommen.

allerdings bin ich jetzt auf eine "lösung" gestoßen:

das problem scheint sich so zu ergeben: wenn ich kompiliere, und dann das pdf öffne und das pdf offen lassen, dann krieg ich beim nächten mal kompilieren die fehlermeldungen.

sobald ich das pdf zumache, kompiliert latex wieder "ganz normal".

vorher (vor der installation) war es egal wenn ich das pdf nicht vorher zugemacht habe.

komisch.
das war es für heute.
vielen dank für die hilfe(n).
lg

[mechanicus]

Hallo,

genau aus diesem Grund habe ich dir den Link gegen, dass dieses Problem beseitigt wird.

Gruß
Marco